Diagnostics information 2-13
4513-200, -220, -230
Programming engine code/Programming system code
Service error
Printer error
Meaning
New code is being programmed into the engine or firmware code flash.
Action
Wait for the message to clear. When the printer has finished programming the code, it performs a soft reset.
✷
✷✷✷✷✷
Meaning
The printer has a service error, and printing has stopped.
Action
Press Continue twice to see the secondary code. See “Service codes” on page 2-28 to locate the problem.
Meaning
The printer has one of the following errors:
• Memory is full, insufficient to save what is in the buffer.
• A page is too complex to print or is shorter than the set page margins.
• Resolution of a formatted page is reduced to 300 dpi.
• A font error occurred.
• Communication with the host computer is lost.
• Short media.
Action
•Press Continue twice quickly to see the secondary error code.
•Press Continue to clear the secondary message.
To Next Page
Loading...
