x Service Manual
4022-XXX
Laser Notices
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR
Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser
product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally
a Class IIIb (3b) laser that is nominally a 5 milliwatt gallium arsenide laser operating in the
wavelength region of 770-795 nanometers. The laser system and printer are designed so
there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Label
Fuser Asm
210 C
/
410 F
To Next Page
Loading...
