Lexmark W812 - Driving Power Transmission to Fuser Assembly

1-16 Service Manual
4022-XXX
Driving Power Transmission to Fuser Assembly
The driving power generated by the motor assembly is transmitted from gear 9 of the
main drive assembly to the fuser assembly.
The connection of gear 8 and gear 9 (that transmit the driving power) with the fuser
assembly is controlled by the cover open cam driven by opening and closing the top
cover. The driving power is transmitted only when the top cover is closed.
Gear Idler
Dup In
Gear
Decurler
Gear HR
Gear IDL
HR
Gear 9
Gear 8
Gear 7
Gear 6
Motor
Assembly
Gear 5
Main Drive
Assembly
Clutch
Assembly
Spring
Gear
Idler
Gear Exit
Fuser Assembly
Front