2-2 Service Manual
4022-XXX
Status Screen
The status screen provides the operator with information on the current state of the
printer.
This screen includes the capability to display a warning message.
Ready
The above is a representation of the operator panel display when the printer is in the
Ready state. The printer is ready to receive and process data from a host system.
Status Messages
These messages provide the operator with information on the current state of the printer.
Generally, no user intervention is required.
User Error Messages
These messages are displayed when the printer is in the Operator Intervention state. The
operator is provided with a description of the operator intervention condition.
When an operator intervention condition occurs, all host links are notified about the
intervention required condition.
All timeouts are stopped while the printer is in an operator intervention state. The only
exception is the PostScript Feed Timeout. This timeout is started when the Load Paper
message is displayed for the manual source.
Service Messages
These messages are displayed whenever the printer is in the Operator Intervention state,
and the printer needs servicing. In general, service errors are non-recoverable. However,
it may be possible to power the printer off and back on to temporarily recover from the
error condition if it is intermittent.
When a Service Message occurs, the printer stops printing. The only recovery is to power
off the printer.
Ready
<warning>
Ready Screen
To Next Page
Loading...
