Lexmark W812 - 250-Sheet Separator Pad Assembly Removal

Repair Information 4-45
4022-XXX
250-Sheet Separator Pad Assembly Removal
1. Unlock the tray extension locks, and then fully slide out the tray extension.
2. Place the paper tray upside down on the table.
3. Remove the five screws from the bottom of the paper tray.
4. Turn paper tray right side up.
5. Unsnap the four latches located on the upper portion of the paper tray assembly.
6. Lift the upper portion of paper tray.
7. Remove separator pad bearings.
8. Remove the separator pad assembly.