General Information 1-17
4022-XXX
Driving Power Transmission to Roll Assembly
The driving power generated by the motor assembly is transmitted from gear 11 of the
main drive assembly to the clutch turn, The driving power drives the duplex output feed
roll reinserted to print the second side of paper transferred from the duplex assembly.
The driving power is then transmitted to the feeder assembly option 250 or feeder
assembly 500 by gear 24 turn R attached to the right of the duplex output feed roll or shaft
turn 14.
Printer Component Function
250-Sheet Paper Tray/Cassette Assembly
Guide Paper Left, Guide Paper Right - Adjusts to the left and right to fit to different paper
sizes. These components hold paper at the specified positions on the left and right
respectively.
Motor
Assembly
Gear 5
Gear 10
Gear 11
Main Drive
Assembly
Clutch Turn
(Duplex Output Feed Roll
/Shaft Turn 14)
Gear 24 Turn R
(to Feeder Assembly Option)
Front
To Next Page
Loading...
