Lexmark W812 - Driving Power Transmission to Paper Feeder

General Information 1-13
4022-XXX
Driving Power Transmission to Paper Feeder
The driving power generated by the motor assembly is transmitted from the gear 14 of the
main drive assembly to the roll assembly MPF and roll assembly tray 1 via the gear 40.
Each time the solenoid MPF or solenoid T1 functions, the gear 40 pick up MPF or
solenoid T1 is pulled by the spring pick up or spring pick up T1, and rotates by one turn,
engaging with gear 14 in the gear 23 MPF or main drive assembly. After one turn ends,
the system releases the engagement with the gear 14 in the gear 23 MPF or main drive
assembly. When the roll assembly MPF or tray 1 driven by the gear 40 pick up MPF or
solenoid T1 rotates by one turn, a sheet of paper is supplied from the tray assembly MPF
or cassette assembly 250 to the printer.
Front
Motor
Assembly
Gear 5
Gear 10
Gear 11
Drive
Assembly
Gear 12 Gear 13
Gear 14
Gear 40
Gear 40 Pick Up T1
Gear 23 MPF
Gear 40
Pick Up MPF