Diagnostic Aids 3-5
4022-XXX
contains envelopes, then the envelope print test pattern is printed on the first envelope
and subsequent envelopes are blank.
Note: The Print Test page can be printed on any paper size. However, more than one
sheet of some media sizes (A5 for example) may be required.
Note: The Print Test page is always single-sided, regardless of the Duplex setting or the
presence of the duplex unit.
While the page is printing the following message is displayed. The Power indicator also
blinks while the page is printing.
If Single is selected, no buttons are active while the Print Test page is printing. However, if
Continuous is selected, Return or Stop can be pressed to cancel the test. While the test
is being canceled, the following message is displayed.
Note: <input source> represents the input source selected for the Print Test. One of the
following sources is displayed: Tray 1, Tray 2, Tray 3, or MP Feeder.
<input source>
Printing...
<Input Source>
Canceling...
To Next Page
Loading...
