Need help?Do you have a question about the LEYBOLD MAG Series and is the answer not in the manual?
General| Applications | Laboratory, medical, and industrial applications |
|---|---|
| Drive | Magnetic drive |
| Sealing | Hermetically sealed |
| Flow Rate | Varies depending on the model, ranging from a few liters per minute (LPM) to several tens of LPM. Consult specific model datasheets for precise values. |
| Max Pressure | Varies by model (typically up to 10 bar) |
| Power Supply | Typically available in various AC voltages (e.g., 115V, 230V) and frequencies (50/60 Hz) |
| Power Consumption | Varies depending on the model, ranging from a few watts to several hundred watts. Consult specific model datasheets for precise values. |
| Operating Temperature | Typically 0°C to +60°C |
| Weight | Varies depending on the model, ranging from a few kilograms to several kilograms. Consult specific model datasheets for precise values. |
| Dimensions | Varies depending on the model. Consult specific model datasheets for precise dimensions. |
| Materials | Stainless steel |
Procedures to prevent hazards to persons and damage to equipment.
Materials used and compatibility with process gases.
Procedures for attaching the pump to the vacuum system.
Steps for connecting the required backing pump.
Guidelines for connecting the cooling water system.
Procedures for installing the frequency converter.
Essential guidelines for operating the MAG pumps.
Functionality and settings of the TMS for CT versions.
Procedures and warnings related to rotor replacement.
Procedures for safely removing the pump, including contamination handling.
Common warning messages and their possible causes/measures.
Detailed failure messages, causes, and troubleshooting steps.
Common malfunctions and their solutions.
To Next Page