LEYBOLD MAG Series User Manual

GA05141_0702 - 09/2004
74
Operation
0
1
P12
0
1
2
S
R
Q
Q
&
-1
s
0
1
2
≥1
≥1
START
REMOTE
+15 V
X14.11
X14.12
X14.10
P36
=1
X14.48
X14.47
Shutdown
Start delay time
START
pump
STOP
pump
(braking the pump
with the pulsed resistor)
START
key pad
STOP
key pad
STOP
interface
START
interface
No
Failure
Operating mode:
Programming only via
serial interface
Failures
causes
braking operation
0V=0
15 V = 1
~3kOhm
m
Fig. 53 Function diagram START/STOP

LEYBOLD MAG Series Specifications

General

Applications	Laboratory, medical, and industrial applications
Drive	Magnetic drive
Sealing	Hermetically sealed
Flow Rate	Varies depending on the model, ranging from a few liters per minute (LPM) to several tens of LPM. Consult specific model datasheets for precise values.
Max Pressure	Varies by model (typically up to 10 bar)
Power Supply	Typically available in various AC voltages (e.g., 115V, 230V) and frequencies (50/60 Hz)
Power Consumption	Varies depending on the model, ranging from a few watts to several hundred watts. Consult specific model datasheets for precise values.
Operating Temperature	Typically 0°C to +60°C
Weight	Varies depending on the model, ranging from a few kilograms to several kilograms. Consult specific model datasheets for precise values.
Dimensions	Varies depending on the model. Consult specific model datasheets for precise dimensions.
Materials	Stainless steel