[DVR316]
1. LED status panel 11. Right button / Split-display
Please see system LED status panel. a. Move cursor right in menu.
2. Camera buttons b. Pan right at PTZ control mode.
Camera selection mode c. Increase a value.
3. SEQ button
d. 16 split-display
12. Down button / Split-display
a. Move cursor down at menu mode.
4. PTZ button
a. At PTZ control mode
b. At Split-display mode b. Tilt down at PTZ control mode.
5. ESC button
c. 4 split-display
6. Left button / Split-display
13. Menu button
a. Move cursor left at menu setup. 14. Backup button
b. Pan left at PTZ control mode. 15. REC button
c. Decrease a value. Start recording operation or stop the
d. 13 split-display recording task.
7. Enter button 16. Fast forward button
a. Enter operation in menu setup. a. Video fast forward
b. Instant PTZ camera selection at live mode.
b. Next event page
c. Camera active mode
17. Play button
8. Up button / Split-display a. Invoke playback selection menu.
a. Move cursor up in menu. b. Replay after FF, FR, Pause, stepping when
b. Tilt up at PTZ control mode. playing video.
c. 9 split-display 18. Pause button
9. Remote control IR receiver Live: freeze video, playback: pause video
10. USB 2.0 & Mouse connector 19. Stop video playback button
a. USB flash disk 20. Fast reverse button
b. USB DVD/RW a. Video fast reverse
c. USB MOUSE b. Previous event page
To Next Page
Loading...
