LiteOn EVO 6800 Series - Page 206

206
Parameter
Name
Description
Unit
U4: PID Monitors
U4-00
PID Feedback
Displays the PID feedback value as a percentage of the
maximum output frequency.
0.01%
U4-01
PID Input
Displays the PID input value as a percentage of the maximum
output frequency.
0.01%
U4-02
PID Output
Displays the PID output value as a percentage of the
maximum output frequency.
0.01%
U4-03
PID Target
Displays the PID target value as a percentage of the maximum
output frequency.
0.01%
U4-04
PID Differential
Feedback
Displays the difference of both feedback values when 10 is set
to both E3-01 and E3-07.
0.01%
U4-05
PID Feedback 2
Displays the adjusted feedback value if differential feedback is
used (U4-00 to U4-04)
The value in U4-00 and U4-05 will be the same if differential
feedback is not used.
0.01%
U4-06
PG Rotating
Direction
0: Correct PG wiring
1: The speed command is opposite to the PG feedback
direction. Please check the wiring.
-
U4-08
PID Output 2
Displays PID control output(100% is the max. frequency)
0.01%
<1> The default is determined by the drive capacity, control method and ND/HD mode.
<2> Refer to user manual for details. http://www.liteon-ia.com.tw/ENG/download.php
<3> Double the value for 440V class AC drives.
<4> The parameter can be set during run.
<6> Contact the local distributor for any malfunction.