LiteOn EVO 6800 Series - Page 64

64
Table 6.1 Parameters Not Subject to Reset
NO.
Name
A1-00
Retain
A1-02
Control Method Selection
A1-06
ND/HD Selection
d1-01
V/F Pattern Selection
d3-00
Retain
E6-05
Retain
P7-12
Installation Method Selection
o2-03
Drive Capacity Selection
 A1- 04/ A1- 05 Password
Set password to parameter A1-05 and enter the password to parameter A1-04 to unlock it.
No.
Name
Setting Range
Default
A1-04
Password
0000 to 9999
0000
A1-05
Password Setting
■ Password and Password Setting
· Once the password other than 0000 is set to A1-05, user cannot edit A1-01 to A1-03, A1-06,
A2-01 to A2-32. Enter the correct password in A1-04 to unlock parameter access.
· A1-04 will display ”nULL”if password has never been set. The user can only set the
password (A1-05). Once the password is set, A1-05 will display ”LtH”. The user can only
enter the set password (A1-04).
Follow the steps to set the password and enter password:
Table 6.2.1 Password Setting Steps
Step
1
Turn on the power to the drive. The initial display appears.
2
Press and select A1-04.
3
Press to display A1-04 setting. “nULL”is displayed as the
password has never been set.
4
Press to select A1-05.