Legal
141
and exchange policies, and for information about hearing aid compatibility.
Hearing Aid Compatibility (HAC) rating (ANSI 2011): M3/T4
This phone has been tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing-aid compatibility
standard. The ANSI standard for hearing-aid compatibility contains two types of ratings:
M: For reduced radio-frequency interference to enable acoustic coupling with hearing-aids that don’t operate in telecoil mode
T: For inductive coupling with hearing aids operating in telecoil mode
A phone is considered hearing-aid compatible if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling.
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing
experience interference noise from wireless devices.
For more information about the actions that the FCC has taken with regard to hearing aid compatibility with wireless devices and
other steps that the FCC has taken to ensure that individuals with disabilities have access to telecommunications services, visit
www.fcc.gov/cgb/dro.
FCC ID for T608G: 2ACCJH170
Radio waves
section.
When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or
otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure requirements. Note that the
product may be transmitting even if you are not making a phone call.
PROTECT YOUR HEARING
To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding
your phone near your ear while the loudspeaker is in use.
Bluetooth Legal Notice
The Bluetooth
©
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Best Buy
Health, Inc. is under license. Other trademarks and trade names are those of their respective owners.
To Next Page
Loading...
