CHAPTER 8: OPERATION 69
TRYTON 107/112
2.1. Display
The liquid crystal display provides the operator with all the necessary data, both for handling the bar feed
system and for maintenance.
The upper portion of the display has 6 lines and is reserved for the reading of text.
Error messages are usually displayed with their diagnostics.
The lower portion of the display is reserved for the display of icons. The icons indicate to the operator which
functions are attributed to keys F1 through F4.
The icons available are the following:
Icon Signification Icon Signification
Switch to automatic mode
Escape
Stop after machining one bar stock
Return to previous menu
Switch to manual mode
Go to the next menu
Pusher forward (picture may be
reversed)
Bar stock extraction (picture may be
reversed)
Pusher reverse (picture may be
reversed)
Automatic Top-Cut positioning in manual
mode
Confirm. In setup mode, the button
must be hold for 3 seconds to
validate the change. (until the icon
Index the barrel
Main setup menu
Start the sequence
To Next Page
Loading...
