4.1. THE SHORT AND LONG TOTALS
The Loadrite Weighing System keeps a running total of the load weights. For each product, two independent totals are stored -
the short total and the long total.
The running total amount of product weighed and loaded onto a truck or carriage.
The Short Total amount is displayed on the Total screen and will continue to accumulate
until it is cleared by pressing .
4.1.1. Clear the short total
The short total keeps accumulating until it is cleared. Clear the short total after a load has been completed, for example, after
each truck or carriage load.
Press .
The short total will display briefly, followed by the Total Cleared message, then the Total screen.
NOTE: If the Loadrite Weighing System has a printer connected, then depending on your installation settings, (i) the totals may
be printed before being cleared, or (ii) you may be prompted to print the totals after the Total Cleared message is displayed.
4.1.2. View and clear the long total
You can view the long total for the current product at any time.
1) Press twice.
The Main Menu will display.
2) Press or to scroll up or down until Long Total is selected.
3) Press .
The long total will display.
After a few seconds, the Indicator will display the Total screen.
Clear the long total for the current products
1) Press twice.
The Main Menu will display.
2) Press or to scroll up or down until Long Total is selected.
3) Press .
The long total for the current product is displayed.
4) Press .
The Long Total Clear? message will display.
To Next Page
