7.2. STOCK PILE TIP-OFF
Using this method, the operator dumps product from the bucket until it contains the right amount for loading onto the truck.
1) Lift the load in the normal way.
The Indicator will display the lifted weight.
2) Press .
The Tip-Off Wait message will display briefly. Then the screen will display the amount in the bucket and the short total.
3) Roll the bucket partially forward, dumping the product.
The Indicator will display the weight in the bucket and the potential weight of the truck.
NOTE: Do not raise or lower the lifting arms when tipping, as this will adversely affect the live weight reading. The bucket
needs to be rolled back for an accurate weight.
4) Keep dumping the product until the desired weight has been reached, then press .
NOTE: You cannot add a weight while the Wait... message is displayed.
5) Tip the product from the bucket into the truck.
To Next Page
