Loadrite L2150 User Manual
9.7.2. Editing a data field value
You can edit a data field value if required by using the Data List function.
IMPORTANT: Data field values can only be entered using specific Western Latin characters, such as in English.
1) Press twice.
The Main Menu will display.
2) Select Data List, then press .
The Edit? screen will display.
3) Complete the following:
you would like to edit a data value
from the data field that is displayed
you would like to select a different
data field
press until the required data field is displayed, then press .
4) Press or to scroll up or down the list of data values until the required data value is displayed, then press .
The Data Entry screen will display
5) Use the keypad to edit the data value, then press .
TIP: Press to clear the current value name.
6) Complete the following:
you would like to edit another
data value
Press until the required data value is displayed, then press .
Go back to step 4.
you would like to select a different
data field
Press .
press until the required data field is displayed, then press .
Go back to step 5.
you have finished editing
data values
Press twice to return to the Main Menu.
9.8. MODULE
The Module option is only available if a Loadrite Data Module is connected to the Indicator
and Data Logger functionality has been correctly configured during installation.
The Data Module Menu provides functionality for use with Loadrite Data Modules.
The following menu items are available:
Lists the properties of the Data Module.
Saves the product list and data lists to the Data Module.
Uploads data stored on the Data Module to the Loadrite Indicator. This can be used to
share data between Indicators.
To Next Page
