Loadrite L2150 - Display

9-41
Loadrite L2150 User Manual
9.10. DISPLAY
This option allows the display to be configured. The following menu items are available:
9.10.1. Changing the screen brightness
To change the brightness of the display screen, complete the following:
1) From the Display Menu select Light, then press .
2) Press or to adjust the backlight brightness up or down.
3) Press to save the brightness level.
9.10.2. Changing the screen contrast
To change the contrast of the display screen, complete the following:
1) From the Display Menu select Contrast, then press .
2) Press or to adjust the backlight contrast up or down.
3) Press to save the contrast level.
9.10.3. Selecting Arm Graphic
To select whether the loader graphic or bar graph displays on the Total screen, complete the following:
1) From the Display Menu select Arm Graphic, then press .
2) Press or to select Loader or Bar Graph.
If you would like ...
Then...
the loader graphic to display on
the Total screen
press or to select Loader.
the bar graph to display on the
Total screen
press or to select Bar Graph.
3) Press to save the arm graphic selection.
9.10.4. Changing the Target screen layout
There are two layouts available for the Target screen. To change the layout, complete the following:
1) From the Display Menu select Target, then press .
2) Press or to select your preferred Target screen layout.
3) Press to save your layout selection.