2. INTRODUCTION
The Loadrite weighing system measures the weight of loads lifted by wheel loaders, forklift trucks and similar machines that use
hydraulic rams to lift the load. The main parts of the Loadrite Weighing System are:
the Indicator installed in the cab of the loader, and
the connected sensors installed on the lifting arms.
As a load is lifted, the trigger and hydraulic pressure transducers send information to the Loadrite Indicator. This information is
converted into a digital weight reading that is displayed on the Loadrite Indicator.
The Loadrite Weighing System can add each lifted load to running totals so that Trucks are loaded accurately and daily
productivity levels can be tracked.
The Loadrite Indicator is the main user interface with the Loadrite Weighing System. It has an internal memory that stores
settings and production data even when it is turned off.
To Next Page
