Loadrite L2150 User Manual
6. OPERATION MODES
The operation modes that are available depend on the modes selected at installation.
The Loadrite Indicator can be operated in different modes:
This is the normal mode of operation. As loads are added, the weights are added to the
totals. The short total is displayed.
In this mode, a target weight is entered into the Indicator before loading. As loads are
added, the remaining value to reach the target is displayed.
The mode used when loading a multiple train wagons or a truck with multiple trailers
where individual totals are required for each individual vehicle. Can be used within Total
or Target modes.
This mode creates one grand total using short totals for all products. This can be used to
ensure that the total across all products does not exceed a specified weight.
To Next Page
