8. PRINTING
The printing options that are available depend on options selected at installation.
Data on the Loadrite Indicator can be printed immediately, or stored in internal storage for delayed printing. There is normally
enough storage for up to one week, depending on usage.
8.1. AUTOMATIC PRINTING
Depending on your configuration, various weight data is printed either:
when is pressed at the end of a load, or
when , , or is pressed.
The information that is printed depends on settings selected at installation. For further information, contact your Loadrite
distributor.
8.2. PRINTING ON DEMAND
The Loadrite Indicator has a range of options for printing data immediately. Printing options are selected from the Print Menu.
8.2.1. Print Docket
> Docket
The Print Docket function prints the previous load, which is made up of all data stored (for example, add, subtract) between the
last two clear events. If the data is not stored, it will not be printed. For example, if the Indicator is not configured to log add
events, weights added will not be printed. This function requires internal storage to be enabled. All configuration of this function
is set during installation.
NOTE: This function will not work if Clear is not used as intended. For example, the operator is loading sand into a truck and
half-way through, a second truck arrives. The operator switches product to rocks and starts loading the second truck (without
clearing the sand total). When the docket is printed, the added weights of sand plus the added weights and total of rocks will be
included.
8.2.2. Print Totals
> Totals
This function prints the total amount of each product loaded that day (since midnight).
8.2.3. Print Indicator Data
> Loadout
This printing option is only available if it has been enabled during installation
and Internal Storage functionality is enabled.
This function prints out all print data stored in the Loadrite Indicator memory since midnight (whether or not it has been turned
off at any stage during that time).
Depending on the configuration, every add, clear, check zero, etc could be included in the printout.