This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
It is your sole responsibility to place, secure and use the Loadrite Weighing System in a manner that will not cause accidents,
personal injury or property damage. Always observe safe operating practices.
Do not install the Loadrite Weighing System in a way that may interfere with the safe operation of the vehicle, or deployment of
safety equipment.
Before you use the Loadrite Weighing System for the first time, familiarize yourself with the system and its operation.
Do not handle the Loadrite Weighing System if it is hot. Let the product cool, out of direct sunlight.
Ensure that the Loadrite Weighing System is connected to a power source with the correct fitting and voltage requirements.
Do not attempt to service the Loadrite Weighing System as this could result in personal injury.
Removing Loadrite Weighing System equipment or adding accessories could affect the accuracy of weighing data and
your warranty.
Do not install cables over horizontal surfaces where they may be stood on or hit by falling objects.
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage.
Loadrite (Auckland) Ltd disclaims all liability for installation or use of the Loadrite Weighing System that causes or
contributes to death, injury or property damage, or that violates any law.
To Next Page
