Logan X90 - Page 110

12A-16
FUEL MIXTURE
Inlet manifold
K7M, and 710
12A
REMOVAL
Mount the vehicle on a two post lift.
Disconnect the battery, starting with the negative ter-
minal.
Remove mounting bolts (1) from the air filter unit.
Disconnect:
-the oil vapour rebreather pipe (2),
-the air inlet sleeve.
Remove the air filter unit.
Unclip the ball joints (3).
Disconnect:
- the temperature sensor (4),
- the pressure sensor (5),
- the brake servo pipe from the inlet manifold,
- pipe (6) from the inlet manifold,
- the petrol vapour rebreathing pipe from the inlet
manifold.
Tightening torquesm
inlet manifold mounting
bolts
2.5 daNm
inlet manifold mounting
nuts
2.5 daNm
108423
107361
1
1
2
107356
6
5
4
3