Logan X90 - Oil Pressure; Engine Management

To Next Page

To Previous Page

10A-4

ENGINE AND LOWER ENGINE ASSEMBLY

Oil pressure

L90, and K7J or K7M

10A

I -CHECKING

Ensure that the engine oil level is between the "MIN"

and "MAX" marks.

Use the tool (Mot. 836-05) and a long dowel of 22 mm.

The oil pressure check must be carried out with the en-

gine warm (approximately 80˚C).

II - USE

Connect the pressure gauge in place of the oil pressure

switch.

III - ENGINE MANAGEMENT

K7J/K7M engine:

- Idling : 1 bar

- 3000 rpm: 3 bar

Torque tighten the oil switch (3.5 daNm).

Special tooling required

Mot. 36-05 Oil pressure gauge kit

87363

K7J

engine

K7M

engine

C + E + F