19C-6
RESERVOIR
Fuel tank
K7J or K7M, and 710
19C
REFITTING
Refit the fuel tank.
Tighten the fuel tank mounting bolts to torque (2.1
daNm).
Refit the exhaust line assembly.
Torque tighten the catalytic converter mounting
nuts (2.1 daNm).
Proceed in the reverse order to removal.
109399
WARNING
It is essential to replace the sealing ring between
the exhaust manifold and the catalytic converter.
WARNING
Connect the battery, starting with the positive ter-
minal; carry out the necessary programming (see
80A, Battery, Battery: Remove and Refit).
To Next Page
Loading...