10A-42
ENGINE AND LOWER ENGINE ASSEMBLY
Oil pump
L90, and K7M, and 710
10A
REMOVAL
Place the vehicle on a two-post lift.
Remove the sump (see 10A, Engine and periphe-
rals, Sump).
Remove:
-the mounting (1)bolts of the oil pump,
-the oil pump.
REFITTING
Tighten to torque the oil pump mounting bolts (2.5
daNm).
Refit the sump (see 10A, Engine and peripherals,
Sump).
Tightening torquesm
oil pump mounting bolts 2.5 daNm
108646
1
To Next Page
Loading...