11A-16
TOP AND FRONT OF ENGINE
Accessories belt
L90, and K7M, and 710, and DIRECTION ASSISTEE, and AIR CONDITIONING
11A
Refit the accessories belt. Remove the 6 mm Allen key.
Turn the engine through three revolutions to position
the belt correctly.
Proceed in the reverse order to removal.
Torque tighten the wheel bolts (10.5 daNm).
106001
WARNING
Make sure that the inner tooth on all the pulleys
remains free.
109238
WARNING
Connect the battery, starting with the positive ter-
minal; carry out the necessary programming (see
80A, Battery: Remove and Refit).
To Next Page
Loading...