4
MOUSE CONTROL
The mouse is the primary input device for navigating system menus.
NOTE: Unless otherwise noted, all system functions described in this manual are achieved through
mouse input.
To use a mouse with the system:
1. Connect a USB mouse to th
e USB MOUSE port on front panel of the system.
NOTE: Only the
top
USB port on the front panel is designed for data backup to a USB flash drive. Do not
connect a USB flash drive to the bottom USB port on the rear panel.
2. Use the mouse buttons to perform the following:
• Left-Button: Click t
o select a menu option;
d u r i n g l i v e v i e w i n g i n s p lit-screen, double-click
on a channel to view the selected channel in
full-screen.; double-click the channel again to
return to split-screen view
• Right-Button: Click to open the Sub-Menu (see
“Using the Sub-Menu” on page 8.)
3. Scroll-Wheel: No
function.
Figure 1.0 Connect a USB mouse to the bottom USB port on the front panel
1
2
3
Figure 1.1 Mouse button operation
To Next Page
Loading...
