40
APPENDIX B: SETTING UP LOCAL AND REMOTE
VIEWING
You can connect the system to a network for local or remote viewing. Once connected, you can
access your system locally or remotely using the DVR Netviewer client with Internet Explorer. The
default IP address of the system is 192.168.3.97
NOTE: Experience with routers and networking are recommended if configuring the network functions
of the system.
What do I need?
• DVR System
• PC with Internet Explorer 6 or later
NOTE: A router (not provided with the system) and a High Speed Cable or DSL Internet connection (for
remote viewing outside your network)
ROUTER
(Not Included)
INTERNET
DVR
PC
(Not Included)
To Next Page
Loading...
