Lorex ECO LH100 SERIES - Live Remote Viewing; Remote PTZ Control

30
Using Remote Surveillance
Live Viewing
By default, remote
surveillance opens
in Live Viewing mode
(split-screen).
To use Live Viewing:
1. Click LIVE at
the
top of the main
screen.
2. Click the display
mode icons t
o
view the main
screen in
single-channel, quad, or split-screen
configurations. You can also double-click a
channel at any time to view it in
single-channel.
3. Click to show or hide all the channel
windows.
4. Click to start/stop manual recording
to your PC on ALL channels. For more
details see RECORDING.
5. Select a channel (outlined in red) and then
click the
audio
bars to increase or
decrease listen-in volume. Click the icon
to mute/unmute.*
NOTE: The Talk function is not supported.
RECORDING
You can record video directly to your PC using
the remote surveillance software.
To record video to your PC:
• From Live Viewing, click to start/stop
manual rec
ording to your PC on ALL
channels
NOTE: You will record video to your PC
regardless of the recording mode on the system
itself. By default, recorded files are saved in
C:\DVR\[ip_address]\Record
Sub-Menu
Right-click any channel to open the sub-menu.
The sub-menu contains the following options:
• Open Window
• Close
• Open All
• Cl
ose All
• Start Record
• Stop
PTZ Control
You must have a PTZ
camera (not included)
connected to the
system in order to use
the PTZ controls.
To control a PTZ
camera:
1. Select the channel
of the
c
onnected
PTZ camera(s).
2. Click the
navigation arrows
to
pan and tilt the
camera.
3. Click + /- to co
ntrol
zoom, focus, and iris.
4. Enter presets.
5. Click SETTING, HAND, and CLEA
R to
further control presets.
**
Figure 24.0 Live Viewing controls
Figure 24.1 Sub-menu
Figure 24.2 PTZ control
*Audio capable camera (not included) required for listen-in audio.
**2-way audio not supported.