49
APPENDIX C: CHANGING PORTS ON YOUR
SYSTEM
For added security, we strongly recommend changing Web port 80 on the system to
any desired
port
—the
port must
not blocked by your Internet service provider (ISP).
NOTE:
Please contact your ISP for complete information on available ports in your area.
Prior to changing ports on your system, you must connect your system to your network using the
included Ethernet cable.
Example
Let’s say you want to change the Web port on your system from 80 to 85.
To change the port number:
1. Open the Main Menu and click ADVA
NCE. The Advanced Setup menu opens.
2. Click NETWORK.
3. Under WEB PORT, enter 0008
5 using the Virtual Keyboard.
4. Click APPLY and then click CLOSE in
the confirmation window.
5. Click EXIT.
The system will prompt you that it must restart. Click SURE.
6. To confirm that the new port number is saved on your system, repeat steps 1~2. The new Web
port should appear on
the Network Setup menu.
You must now include the new Web port number in the URL when logging in to your system with
Internet Explorer.
NOTE: Requires Internet Explorer 6 or later.
Figure 36.0 Change the Web port
To Next Page
Loading...
