64
APPENDIX L: MOBILE PHONE
INSTANT VIEWING
You can access your system while on the go using your Windows Mobile enabled touch-screen
smart phone (Windows Mobile 6.0 or greater is required).
NOTE: Currently, mobile viewing is supported by Windows Mobile
only
.
Mobile Phone Instant Viewing features the following:
• 352x240 resolution
• S
electable one channel display
• Supports IP address only
• Requires a touch screen smart phone
Enable Mobile Viewing on the System
You must first enable mobile viewing on the system.
To enable mobile viewing:
1. Under MOBILE NETWORK, select 3G, 2.75
G, or 2.5G.
NOTE: Contact your cellular provider if you are unsure about
the network of your cellular phone.
2. Under MOBILE PORT, enter your mobile port number
(by default, 100).
3. Click APPLY. Click CLOS
E in the confirmation window.
4. Click EXIT in all
menus until all windows are closed.
To Next Page
Loading...
