21
Using the Main Menu
VIDEO/AUDIO
Use the Video/Audio menu to set the resolution
and camera system on the system.
To configure video options:
1. Under VGA RESOLUTION, select 800x
600
or 1024x768.
2. Under CAMERA SYSTEM, select NTSC or
PAL.
3. Click APPLY. Click CLOS
E in the
confirmation window.
4. Click EXIT in all
menus until all windows
are closed.
To configure audio options:
1. From the Video/Audio menu, click
VOLU
ME SETUP.
A split-screen display
view appears.
2. Click any channel and adjust the slider to
increase/decr
ease the volume for listen-in
audio.
3. Click X to r
eturn to the Video/Audio menu.
4. Click APPLY. Click CLOS
E in the
confirmation window.
5. Click EXIT in all
menus until all windows
are closed.
ADVANCE
Use the Advanced Setup menu to
configure alarm settings, motion
detection, mobile surveillance, PTZ
settings and network settings.
The Advanced Setup menu contains the
following sub-menus: Alar
m, Info, MD,
Mobile, System, PTZ, and Network.
ALARM
Use the Alarm menu to configure alarm and
email settings.
NOTE: External alarm devices must be
connected to the alarm block on the rear panel
of the system in order to use the I/O (input/
output) alarms of the system.
To configure alarm settings:
1. Under I/O CHANNEL, select NO (Normal
Open), NC (Normal Closed),
or OFF. Click
NEXT PAGE to view additional channels
(8-channel models only).
2. Apply loss alarms to the following:
Figure 13.2 Video/Audio menu
Figure 14.0 Video/Audio menu
Figure 15.0 Video/Audio menu
To Next Page
Loading...
