Lorex ECO LH100 SERIES - Searching Recorded Content; Customizing Recording Schedules

17
Using the Main Menu
5. Under REC. SIZE, select 15MIN, 30MIN,
45MIN, or 60MIN.
NOTE: Record Size sets the file size for recorded
video files on the system. Instead of recording
data as one large file, the system will divide the
data into blocks of 15, 30, 45, or 60 minutes. This
makes the recorded data easier to search.
6. Click APPLY. Click CLOSE in the
confirmation window.
7. Click EXIT in ev
ery menu until all windows
are closed.
Setting a Recording Schedule
By default, the system is set to record
continuously. You can program the system to
record according to a customized recording
schedule.
The Schedule Grid shows the days of the week
and hours 0~23.
You can set Alarm Recording
(Red), General (Normal) Recording (Green), or
No Recording (Blue) to each time block of each
day.
To set a recording schedule:
1. Open the Main Menu and click REC
ORD.
2. Under REC. MODE, select TIMER RECORD.
3. Click SCHEDULE. The Schedule
menu
opens.
4. Under CHANNEL, select specific channels
or sel
ect ALL.
5. Below the grid, click either ALARM (red)
,
GENERAL (Green), or NO RECORD (Blue)
and then click a time block on the desired
day.
6. Use the FROM/TO drop-do
wn menus to
copy the schedule of one day to another.
For example, if you want your schedule for
Monday to be the same on Wednesday:
under FROM select MON, under TO select
WED, and then click COPY.
7. Click SAVE.
8. Click EXIT in each
menu until all
windows
are closed.
Example
You want your system to record continuously
on all channels from 9 AM to 5 PM Monday to
Friday. You also want Alarm/Motion recording
from 5 PM to 9 AM. You do not want the system
to record Saturday or Sunday.
NOTE: By default, the system is set to record
continuously 24 hours a day, 7 days a week.
To set the recording schedule:
1. Open the Schedule menu.
2. Under CHANNEL, select ALL.
3. Click the bl
ue NO R
ECORD block below
the grid. A checkmark will appear in the
block.
4. Under SUN, click blocks 00~23. The
bl
ocks will turn blue.
5. Under FROM, select SUN. Under T
O select
SAT, and then click COPY.
6. Click the red ALARM block bel
ow the grid.
7. Under MON, click blocks 00~8 and
blocks
18~23. The blocks will turn red.
8. Under FROM, select MON. Under TO
select
TUE, and then click COPY. Repeat for
Wednesday, Thursday, and Friday. Your
completed schedule should the same as
the schedule in figure 11.2.
9. Click SAVE. Click CL
OSE in
the
confirmation window.
10. Click EXIT in all me
nus until all windows
are closed.
Figure 11.1 Recording Schedule
Figure 11.2 Customized recording schedule