10
SETTING THE DATE AND TIME
It is highly recommended to immediately set the date and time when first setting up your system.
To set the date and time:
1. Right-click anywhere on the screen to open the
Sub-Menu and sel
ect MAIN MENU. The Main Menu
opens.
2. From the Main Menu, click
BASIC. The Setup menu
opens.
3. Click DATE/TIME and configure the following options:
• DATE: En
ter the day, month, and year
• DATE FORMAT: Select DD/MM/YYYY, MM/DD/YYYY,
or YYYY/MM/DD
• TIME: Enter the time
• TIME FORMAT: Use the drop-down menu and select
12HOURS or 24HOURS
• DST: Use the drop-down menu to select ON/OFF to
enable/disable Daylight Savings Time
4. Click MODIFY
DATE AND TIME. Click CLOSE in the
confirmation window.
5. Click APPLY. The new dat
e and time are saved.
Daylight Savings Time
To set daylight savings time:
1. Under DST, select ON. DST options appear
.
2. Under DST MODE select one of the following:
• CUSTOM: Set cus
tomized start and end times for DST
(go to step 4)
• DEFAULT: The Default setting will apply DST from the
second Sunday of March to the second Sunday in
November (go to step 3)
3. If using the DEFAULT, click APPLY.
4. If setting a CUSTOM DST, use the drop-down menus to
sele
ct a week and month for the start and end times.
5. Click APPLY. Click CLOS
E in the confirmation window.
6. Click EXIT in each
menu until all windows are closed.
Figure 5.0 Click DATE/TIME from the Setup Menu
Figure 5.1 Configure date & time options
Figure 5.2 Configure DST settings
To Next Page
Loading...
