50
Appendix C: Changing Ports On Your System
Local Viewing:
To log in using the new port number:
1. Open Internet Explorer.
2. In the address bar, enter the IP address of your system immediately followed by :85 (no
spac
es). For example, http://192.168.3.97:85
3. Enter your system ADMIN password and
select LAN.
NOTE: If you have not enabled passwords on the system, leave the password field blank.
4. Click LOGIN.
Figure 36.1 Enter :85 at the end of the IP address
Figure 36.2 Login with your LAN ID and password
To Next Page
Loading...
