Why is the picture not clear on my Lorex L222A8 Voice Recorder?
If your Lorex Voice Recorder picture is not clear, check the camera lens for dirt, dust, or spiderwebs and clean it with a soft, clean cloth. Too much environmental interference will also affect picture clarity, so try moving your camera to a different location.
Why is there a bright spot in video when viewing at night on my Lorex L222A8?
If there is a bright spot in the video when viewing at night on your Lorex Voice Recorder, it is likely due to night vision reflecting when pointing a camera through a window. Try moving the camera to a different location.
What to do if there is no picture on monitor/TV after connecting it to Lorex L222A8 Voice Recorder?
If there is no picture on your monitor/TV after connecting it to the Lorex Voice Recorder, power off the monitor/TV and the recorder. Then, power on the monitor/TV first, followed by the recorder. Ensure that the monitor/TV is set to the correct input channel for the recorder. Finally, check the video cable connections to both the recorder and the monitor/TV.
What to do if mouse is not detected by Lorex Voice Recorder system?
If the mouse is not detected by your Lorex Voice Recorder system, remove and then firmly reconnect the mouse cable to one of the USB ports marked 'Mouse / Backup'. If that doesn't work, power off the system (disconnect the power cable), firmly connect a USB mouse to one of the USB ports, and then reconnect the power cable to the 12V DC port on the rear panel.
How to turn off beeping during motion detection on Lorex Voice Recorder?
To stop the system from beeping during motion detection on your Lorex Voice Recorder, enter the main menu. Under Settings, click Motion to open the Motion Settings tab. Use the dropdown next to Buzzer to select Disable for any channels you want to disable the buzzer for, then click Save.
General| Brand | Lorex |
|---|---|
| Model | L222A8 Series |
| Category | Voice Recorder |
| Language | English |
Instructions for preparing the wire-free cameras and their power packs before initial setup.
Steps to connect the recorder to a router, monitor, mouse, and power adapter.
Guides on connecting the system to a smartphone or tablet using the Lorex Cirrus app.
Provides instructions and tips for mounting and installing the security cameras.
Details the process of searching for video recordings by date and time.
Describes the various controls used to manage video playback, including play, pause, and zoom.
Guides on searching for and backing up recordings using the dedicated Backup mode.
Explains how to back up video clips or entire recordings directly from the Playback interface.
Steps to change the password for administrator and user accounts.
Instructions for creating new user accounts and enabling them.
Details on how to define specific access levels for user accounts to different system menus.
Details the requirement and methods for port forwarding on the router to enable DDNS.
To Next Page
