Lorex LH040400 User Manual

Using the PC/Mac Client Software
17
Note
Please note that you will need to physically connect the PTZ camera to the DVR and acquire PTZ param-
eters from the PTZ camera manufacturer’s instruction manual. For more details on connecting a PTZ
camera to your system, see 21 Connecting a PTZ Camera, page 132.
To configure PTZ settings:
1. Click the Remote Setting tab, and click Device>PTZ.
2. Configure the following:
• Channel: Select the channel that the PTZ camera is connected to.
• Protocol: Select the protocol of the PTZ camera.
• Baud Rate: Select the baud rate of the PTZ camera.
• Data Bit: Select the data bit rate of the PTZ camera.
• Stop Bit: Select the stop bit rate of the PTZ camera.
• Parity: Select the parity settings of the PTZ camera.
• Cruise: Select Enable or Disable.
• Address: Select the address of the PTZ camera.
3. Click Save to apply your settings.
17.24 Configuring the System Time and Date
1. Click the Remote Setting tab, and click System>General.
#LX400015; r. 1.0/13705/13705; en-US
91

Lorex LH040400 Specifications

General

Brand	Lorex
Model	LH040400
Category	DVR
Language	English