Using the Main Menu15
3. Select the menus that you wish to restore to default settings, or click All to restore the
entire system to default settings.
Note
It is recommended to leave the Network menu unchecked when restoring the system to factory de-
faults. If you restore the Network menu, you will need to redo remote connectivity setup to access
your DVR over the Internet.
4. Click Apply.
5. When the warning window appears, click OK to restore your settings.
6. Click OK to return to the menu.
7. Right-click until you have exited all menus. The DVR prompts you to restart.
15.8.4 Restarting or Shutting Down the DVR
1. Right-click to open the Menu Bar and click the Main Menu button (
).
2. Click Advanced.
#LX400015; r. 1.0/13705/13705; en-US
65
To Next Page
Loading...
Need help?
General