Lorex LH040400 User Manual

Playback12
12.1.3 Controlling the Time Range of the Playback Bar
The time range is the start and end times of the footage displayed in the Playback Bar. By
default, the Playback Bar displays recordings recorded on the day selected for playback
(from 00:00~24:00). You can change the time range to narrow in on a specific time.
To control the time range of the Playback Bar:
1. During Playback mode, click
to open the time range controls.
2. Click 30m, 1H, 2H, or 24H to select a time range. For example, if 30m is selected, the
playback bar will show 15 minutes before to 15 minutes after the currently playing time.
OR
To create a custom time range:
2.1. Click
. The button will become colored.
2.2. Move your mouse to the time you where you would like the range to start and
click. Then, move your mouse to the time you where you would like the range to
end and click. The start and end times will be replaced by the 1st and 2nd times
that you clicked on.
12.1.4 Using Zoom in Playback Mode
You can use Zoom in Playback Mode. This is useful if you need a closer look at recorded
video.
Note
Zoom is only available when a single channel is selected for playback.
To use zoom in Playback Mode:
1. Open Playback Mode with only one channel selected. For details, see 12.1 Playing
Back Recorded Video, page 26.
#LX400015; r. 1.0/13705/13705; en-US
29

Lorex LH040400 Specifications

General

Brand	Lorex
Model	LH040400
Category	DVR
Language	English