Using the Main Menu15
2. In Client Port, enter the desired Client Port (default: 9000).
Note
9000 is represented as "09000."
3. In HTTP Port, enter the desired HTTP Port (default: 80).
4. Click Apply to save your settings.
5. Right-click to exit all menus. You will be prompted to restart.
15.4.4 Adjusting Remote Connectivity Streaming Rates
You can adjust the data streaming rate (also called the SubStream) when you connect to
the system remotely. If you want to conserve bandwidth, select a lower frame rate and
bitrate.
Note
Setting your system to stream with a lower frame and bitrate may cause the video to appear choppy or
slow.
To adjust the SubStream settings:
1. Click the SubStream tab.
#LX400015; r. 1.0/13705/13705; en-US
53
To Next Page
Loading...
Need help?
General