Lorex LH040400 User Manual

DDNS Setup (Advanced)
25
3. Configure the following:
00
00
1
2
3
4
5
EXAMPLE
3.1. Under Login Type, select IP Login.
3.2. Under IP Address, enter the DVR’s IP Address (e.g. 192.168.0.100).
3.3. Under User Name, enter the DVR’s user name (default: admin).
3.4. Under Password, enter the DVR’s password (default: 000000).
3.5. Under Client Port, enter the DVR’s Client Port (default: 9000).
4. Click Login.
• If this is the first time connecting to your system, you will be prompted to change the
password. Enter a new 6 character password and click OK.
To connect using the DVR’s local IP address on a Mac:
1. Visit www.lorextechnology.com and download the Client Software for Mac.
2. Extract the installer file and double-click it to install.
3. Open Safari, then click Safari>Quit Safari. This resets Safari to complete the
installation.
4. Open the Lorex Stratus Client (
) from the Applications list.
#LX400015; r. 1.0/13705/13705; en-US
149

Lorex LH040400 Specifications

General

Brand	Lorex
Model	LH040400
Category	DVR
Language	English