Printing results of a selected time period
Press [MODE], [Shift] + [2][1] keys.
Confirm with [
] key.
The display shows:
Enter year, month and day for the first day of the required
period, e.g.: 14 May 2009 = [Shift] + [0][9][0][5][1][4]
Confirm with [
] key.
The display shows:
Enter year, month and day for the last day of the required
period, e.g.: 19 May 2009 = [Shift] + [0][9][0][5][1][9]
Confirm with [
] key.
The display shows:
Press [
] key and all stored results in the selected date range
are printed.
After printing the photometer goes back to mode menu
automatically.
Note:
It is possible to cancel the entry by [ESC].
If you want to print only results of one day enter the same date twice to determine the
period.
<Print>
sorted: date
from yy-mm-dd
__-__-__
to yy-mm-dd
__-__-__
from 2009-05-14
to 2009-05-19
Start:
cancel: ESC
Mode
12
To Next Page
Loading...
