Lovibond Maxi Direct - Page 231

229
MaxiDirect_2c 03/2010
Recall results of a selected Code No. range
Press [MODE], [Shift] + [3][2] keys.
Confirm with [
] key.
The display shows:
Enter numeric code number (up to 6 places) for the first
required Code No., e.g.: [Shift] + [1].
Confirm with [
] key.
The display shows:
Enter numeric code number (up to 6 places) for the last
required Code No., e.g.: [Shift] + [1][0].
Confirm with [
] key.
The display shows:
• Press [
] key and all stored results in the selected
Code No. range are displayed.
• Press [F3] key to print the displayed result.
• Press [F2] key to print all selected results.
• End with [ESC].
Note:
It is possible to cancel the entry by [ESC].
If you want to recall only results of one code number enter the same code number twice.
If you want to recall all results without code no. (code no. is 0) enter Zero [0] twice.
<Storage>
sorted: Code-No.
from _ _ _ _ _ _
to _ _ _ _ _ _
from 000001
to 000010
Start: cancel: ESC
print: F3
print all: F2
Mode
23