Technical Manual LÖWEN Dart HB8
01/2019 13
3. Slowly and carefully fold up the upper part. Pay attention to the lower part's stability in the process. Observe
that the upper part has to be held tightly until it is firmly screwed to the lower part.
4. Verify that the wires are not pinched. Using the provided thumb screws, screw the upper and lower cabinet
parts together from inside the electronics compartment. Ensure that the upper and lower parts are firmly
screwed together. You prevent possible risk of injury that way.
5. Connecting the mains cable: Upon delivery, the mains cable lies rolled up in the cash box. Guide the mains
cable's free end through the opening and pull enough mains cable though the opening to reach the mains
socket.
6. Screw in the spot lamp. Lamp power is at most 40 W! (Model R63, E27 socket, 230 V/40 W)
7. Now place the game in its final position near a mains socket. While moving, the device must never tip more than
10 degrees! Plug the device's mains cable into the mains socket.
CAUTION:
Do not close the device's ventilation slots!
Strain relief
Mains cable in operation position
Mains plug
Mains cable in transportation position
To Next Page
Loading...