LÖWEN HB8 - P14 - SEL rPd: Time-Out Timer Programming

Technical Manual LÖWEN Dart HB8
01/2019 57
Deactivate Stepper Bonus Credits:
Repeat steps 1 thru 5.
6. TEMP SCORE display will show oFF.
7. Press [OPTIONS II] button to confirm. The entered value will be transferred from the TEMP SCORE
display into the player 2 display.
8. Press [PLAYER CHANGE] button to exit.
NOTICE Stepper bonus credits will be shown separately in the statistics printout.
6.1.12 P14 - SEL rPd: Time-Out Timer Programming
The Time-Out Timer is used for the Time Out Handicap feature. The programmed value represents the time
required (in seconds) to count down all 21 LEDs. Factory setting: 5.0 seconds.
1. Press [TEST] button on the controller board.
tSt appears in the TEMP SCORE display.
2. Press [GAMES] or [OPTIONS I] button until Pr9 appears in the TEMP SCORE display.
3. Press [OPTIONS II] button to confirm.
P01 appears in the TEMP SCORE display.
4. Press [GAMES] or [OPTIONS I] button until SEL rPd appears in the player 1 – 2 display, and P14 in
the TEMP SCORE display.
5. Press [OPTIONS II] button to confirm. The current value is displayed in the player 2 display.
1 2
3 4
1
2
3
4
5
6
7
8
TEMP SCORE
5 6
7 8
6. Press [GAMES] or [OPTIONS I] button to switch between 2.0 seconds and 9.0 seconds in 0.5 second
steps.
The new value will be displayed in the TEMP SCORE display.
7. Press [OPTIONS II] button to confirm.
8. Press [PLAYER CHANGE] button to exit.