Technical Manual LÖWEN Dart HB8
01/2019 74
7.2.5 t05 - SEL LP: Lamp Test
“DON’T THROW” lamp, “THROW” lamp, as well as [PLAYER CHANGE] button will be individually switched
on and off again in this same order. Afterwards, the target illumination will be switched off and on again.
1. Press [TEST] button on the controller board.
tSt appears in the TEMP SCORE display.
2. Press [OPTIONS II] button to confirm.
3. Press [GAMES] or [OPTIONS I] button until SEL LP appears in the player 1 – 2 display, and t05 in the
TEMP SCORE display.
4. Press [OPTIONS II] button to start the test.
After all lamps have been tested, this test program automatically returns to TEST mode tSt.
7.2.6 t06 - SEL Crt: Cricket Display LED Test
All Cricket LEDs, Bullseye LEDs, player score LEDs, and dart icon LEDs will be switched on and off again.
1. Press the [TEST] button on the controller board.
tSt appears in the TEMP SCORE display.
2. Press [OPTIONS II] button to confirm.
3. Press [GAMES] or [OPTIONS I] button until SEL Crt appears in the player 1 -2 display, and t06 in the
TEMP SCORE display.
4. Press [OPTIONS II] button to start the test.
After all LEDs have been tested, this test program automatically returns to the TEST mode tSt.
To Next Page
Loading...