Technical Manual LÖWEN Dart HB8
01/2019 24
9. Once the update has been successfully completed, the machine beeps four times.
After auto-restart and selftest, the machine is ready for operation.
10. Remove the USB flashdrive from the controller board.
11. Close the electronics compartment.
Possible Errors during Update:
Update not carried out No new program version available
Update takes too long Use a USB 2.0 flashdrive
Long beep tone Update failed remove USB flashdrive and repeat
update process.
If this error occurs again, please contact LÖWEN
Export Department
Update takes too long and machine does not work
after update
Please contact LÖWEN Export Department
Power supply is interrupted during update process Please contact LÖWEN Export Department
Removal of USB flashdrive during update process Please contact LÖWEN Export Department
To Next Page
Loading...