LSIS XGL-EFMTB - Page 64

Chapter 5 XG5000 Program
5-15
(3) After select communication module
[fig.5.3.4] double click High-speed Link 01 from project tab
[fig.5.3.5] double click High-speed Link 01 from View High-speed Link tab
(4) High-speed link parameters settings (double-click High-speed link parameters window)
[Fig. 5.3.6] High-speed link block settings
Classification
Description
Station type
MASTER
This item is not related with FEnt I/F module so this is always
fixed as ‘MASTER’
SLAVE
Mode
1.Send
Sends data
2.Receive
Receives data
Station No.
In case of Send Mode, it indicates station number of this module.
And in case of Receive Mode, it indicates that of target module.
Block No.
Specify Tx Block and Rx Block.
Read area
Memory area of this module. (P,L,M,K,…)
Read area Word size
Specify data size to transmit..(WORD)
Save area
Area to save data received from the destination station.
Save area Word size
Specify data size to receive.